4. Repairs and Upgrades
Guides for repairing and upgrading the H-Series
- 4.18 Replace Turret Pulley Belt
- 4.0 Troubleshooting Guide
- 4.1 Extruder Jam Recovery
- 4.2 Repair/replace an FDM Hotend
- 4.3 Replace Probe Tip
- 4.4 Replacing Kapton Sheet
- 4.5 Upgrading Firmware
- 4.6 Install FDM tool
- 4.7 Install and tram spindle
- 4.8 Add vacuum to prime cycle
- 4.9 Adding filament assist drives
- 4.10 Replace a Fuse
- 4.11 Maintenance
- 4.12 Upgrade to RRF3.x
- 4.13 Add Filament Drying Cabinet
- 4.14 Install Pendant
- 4.16 - Adjust Probe Retraction
- 4.17 Replace Counterweight Cable