H-Series Online Manual
H-SERIES MANUAL A - Basic 3-Axis Operation
All preliminary information about the H-Series Machines - 3D printing and CNC milling, up to 3-axes.
- 1. Getting Started 1. Getting Started
- 2. Basic Machine Operation 2. Basic Machine Operation
- 3. Machine Setup and Calibration 3. Machine Setup and Calibration
- 4. Repairs and Upgrades 4. Repairs and Upgrades
- 5. Basic 3D Printing Operations 5. Basic 3D Printing Operations
- 6. Basic CNC Operations 6. Basic CNC Operations
1. Getting Started
- 1.1 Uncrating
- 1.2 Workbench Design
- 1.3 Bellows and Build Enclosure Assembly
- 1.4 H-Series Mechanical Summary
- 1.5 Safety
- 1.6 Installing software
2. Basic Machine Operation
- 2.1 Controller Interface
- 2.2 Machine Motion Overview
- 2.3 How to Control Tools
- 2.4 Loading/Unloading Filament
- 2.5 Using 3D Print Bed
- 2.6 Operating the Dry Filament Cabinet
3. Machine Setup and Calibration
4. Repairs and Upgrades
- 4.1 Extruder Jam Recovery
- 4.2 Repair/replace an FDM Hotend
- 4.3 Replace Probe Tip
- 4.4 Replacing Kapton Sheet
- 4.5 Upgrading firmware
- 4.6 Install FDM tool
5. Basic 3D Printing Operations
- 5.1 Setting up a Simplify3D Process
- 5.2 Diabase Print Wizard
- 5.3 3D Print Troubleshooting
- 5.4 Bed Materials and Adhesion
- 5.5 Multi-material Print Setup
- 5.6 Simplify3D Grouping Processes
6. Basic CNC Operations
- 6.1 Tooling Plate Basics
- 6.2 Flat Vise Operation
- 6.3 Setting Workpiece Offsets (WCS)
- 6.4 Generate and Run CNC File
- 6.5 Aligning Coordinate Systems
- 6.6 Raw Material Selection