The H-Series is capable of cutting a variety of materials. Spindle speed and feedrates will vary depending on workholding, tool selection, desired finish, depth of cut, etc. The recommendations below are for 1/8" 2-flute flat endmill at 1mm depth of cut:
- ABS
- Spindle: 10,000 RPM
- Feed rate: 1000mm/m
- Acetal:
- Acrylic:
- Aluminum (6061)
- Spindle: 12,000 RPM
- Feed rate: 200mm/m
- Brass (360)
- Spindle: 12,000 RPM
- Feed rate: 300mm/m
- Foam (elastomer, machinable)
- Spindle: 8,000 RPM
- Feed rate: 2000mm/m
- HDPE:
- PETG
- Spindle: 10,000 RPM
- Feed rate: 1000mm/m
- Wax:
- Wood (hardwood):